Instructions / Assembly

- 18 -

SU NSIT T

Attach the Table Top (T) to the Side

Panel (U) by securing with M6*35

Head Cap Screws (F) and Washers

(H). Tighten into place with Allen Key

(I). Pls don't fully tighten in this

step. Do this in 4 places.

Attach the Side Panel (S) to the Table

Top (T) and Side Panel (U) by securing

with M6*35 Head Cap Screws (F) and

Washers (H). Do this in 4 places. Then

tighten all 8 screws into place with

Allen Key (I).

Note: If any screw holes cannot be

aligned, loosen all the screws and go

back step 1 and restart assembly.

NOTE:

When tightening the Screws, tighten sequentially.

DO NOT tighten any Screws fully and then move on to the next one.

This may cause the frame to warp.

If there is still wobbles or screw holes cannot be aligned,loosen the

screws and execute this same process.

If the Table is not stable it could lead to damage to the product.