Instructions / Assembly

- 12 -

SU NSIT T

Attach the Seat Back (A1) to the

Armrest (B1) by securing with M6*35

Head Cap Screws (F) and Washers

(H).Tighten into place with Allen Key

(I). Pls don't fully tighten in this

step. Do this in 2 places.

Attach the Seat Base (C1) to the Seat

Back (A1) and Armrest (B1) by

securing with M6*35 Head Cap Screws

(F) and Washers (H). Do this in 7

places. Then tighten all 17 screws into

place with Allen Key (I) .

Note: If any screw holes cannot be

aligned, loosen all the screws and go

back step 1 and restart assembly.

NOTE:

When tightening the Screws, tighten sequentially.

DO NOT tighten any Screws fully and then move on to the next one.

This may cause the frame to warp.

If there is still wobbles or screw holes cannot be aligned,loosen the

screws and execute this same process.

If the Chair is not stable it could lead to damage to the product.