Instructions / Assembly

- 5 -
SU NSIT T
Attach the Back Head (B) to the
Left and Right Arm (LA&RA) by
securing with Head Cap Screws
(H) and Washers (G). Tighten into
place with Allen Key (J) . Do this in
2 places
1
Attach the Seat Base (C) to the
assembly by securing with Head
Cap Screws (H) and Washers (G) .
Hand tighten all the screws to line
up all the pieces. Pls don't fully
tighten in this step. Do this in 8
places.
2
G
H
RA
B
LA
H
G
C
LA
RA
NOTE:
When tightening the Screws, tighten sequentially.
DO NOT tighten any Screws fully and then move on to the next one.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned,loosen the
screws and execute this same process.
If the Chair is not stable it could lead to damage to the product.