Instructions / Assembly

Note: If any screw holes cannot be aligned, pls loosen all the
screws and go back step 1 and restart assembly.
- 7 -
NOTE:
When tightening the screws, tighten sequentially.
DO NOT tighten any screws fully and then move on to the next one.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned,loosen the
screws and execute this same process.
If the Ottoman is not stable it could lead to damage to the product.
Orange-Casual
1
2
T
T
S
R
V
U
T
T
S
2
Attach the Side Panels (T) to the Ottoman Top (S) by securing with M6*30
Head cap screws (R) and washers (E). Hand tigten to line up all the pieces. Pls
don’t fully tighten in this step. Do this in 4 places.
Attach the Connecting Rod (U) to the Side Panels (T) by securing with M6*15
short Head cap screws (V) and Washers (E). Do this in 2 places. Then tighten
all 8 screws into place with Allen Key (G).