Instructions / Assembly

NOTE:

When tightening the screws, tighten sequentially.

DO NOT tighten any screws fully and then move on to the next one.

This may cause the frame to warp.

If there is still wobbles or screw holes cannot be aligned,loosen the

screws and execute this same process.

If the Chair is not stable it could lead to damage to the product.

Attach the Seat Base (A1) to the Right Armrest (B) by securing with Head cap

screws (F) and Washers (E). Hand tighten to line up 2 pieces. Pls don’t fully

tighten in this step. Do this in 2 places.

Attach the Seat Back (D1) to the Right Armrest (B) and Seat Base (A1) by securing

with Head cap screws (F) and Washers (E). Hand tighten to line up all the pieces. Pls

don’t fully tighten in this step. Do this in 4 places.

- 4 -

Orange-Casual