Datasheet

MC68HC908QY4•MC68HC908QT4•MC68HC908QY2•MC68HC908QT2•MC68HC908QY1•MC68HC908QT1
212 Electrical Specifications MOTOROLA
Electrical Specifications
NON-DISCLOSURE AGREEMENT REQUIRED
18.3 Absolute Maximum Ratings
Maximum ratings are the extreme limits to which the microcontroller unit
(MCU) can be exposed without permanently damaging it.
NOTE: This device is not guaranteed to operate properly at the maximum
ratings. Refer to 18.6 5-V DC Electrical Characteristics and
18.9 3-V DC Electrical Characteristics for guaranteed operating
conditions.
NOTE: This device contains circuitry to protect the inputs against damage due
to high static voltages or electric fields; however, it is advised that normal
precautions be taken to avoid application of any voltage higher than
maximum-rated voltages to this high-impedance circuit. For proper
operation, it is recommended that V
IN
and V
OUT
be constrained to the
range V
SS
≤ (V
IN
or V
OUT
) ≤ V
DD
. Reliability of operation is enhanced if
unused inputs are connected to an appropriate logic voltage level (for
example, either V
SS
or V
DD
.)
Characteristic
(1)
1. Voltages references to V
SS
.
Symbol Value Unit
Supply voltage
V
DD
–0.3 to +6.0 V
Input voltage
V
IN
V
SS
–0.3 to V
DD
+0.3
V
Mode entry voltage, IRQ
pin
V
TST
V
SS
–0.3 to +9.1
V
Maximum current per pin excluding
PTA0–PTA5, V
DD
, and V
SS
I±15mA
Maximum current for pins
PTA0–PTA5
I
PTA0—
I
PTA5
±25 mA
Storage temperature
T
STG
–55 to +150 °C
Maximum current out of V
SS
I
MVSS
100 mA
Maximum current into V
DD
I
MVDD
100 mA