Target Interface User Manual

Appendix
MMDS Commands
A–76
MMDS0508 Target Interface
TT
Displays the difference between the beginning and ending frames in the trace buffer.
Example:
TT 80
Displays the difference between frame 80 and the ending frame in the trace buffer.
Example:
TT 10 40
Displays the difference between frames 10 and 40 in the trace buffer.
VA
A.1.3.31 Short Description
analyzer view.
A.1.3.32 Syntax
VA [MODE=(MIX | INS | GRAPH)]
MODE=: When followed by one of the three following keywords, specifies the mode of
the bus analyzer window display.
MIX: Mixed view mode.
INS: Instruction view mode.
GRAPH: Graphical view mode.
A.1.3.33 Description
The VA command specifies the display format for the analyzer trace buffer. This
command is valid only if the bus analyzer is open.
Example:
VA MODE=MIX
Selects mixed view mode.
Freescale Semiconductor, Inc.
For More Information: www.freescale.com