Target Interface User Manual

Appendix
MMDS Commands
A–70
MMDS0508 Target Interface
LF logfile
Open the logging file.
Example:
LT
Copy all the trace buffer to the logging file.
Example:
NOLF
Close the logging file.
SC
A.1.3.19 Short Description
set analyzer clock.
A.1.3.20 Syntax
SC [timetag [frequency]]
timetag: One of these values:
OSC1MHZ (1 Mhz oscillator)
OSC2MHZ (2 Mhz oscillator)
OSC4MHZ (4 Mhz oscillator)
OSC8MHZ (8 Mhz oscillator)
OSC16MHZ (16 Mhz oscillator)
EXT (external clock)
BUS (bus clock)
PROGRAM (programmable clock)
frequency: Time tag clock frequency for the programmable clock, 50 Hz to 50 kHz
(enter a decimal hertz value). The programmable clock source has a fundamental
frequency of 500,000 Hz; the actual frequency the system uses is the quotient of
Freescale Semiconductor, Inc.
For More Information: www.freescale.com