Instruction Manual

12
13
CONTROLLER HARNESS
SEAT POST
MANUAL GEAR LEVER
BODY SHROUD
SHOCK ABSORBER
BATTERY
POWER CONNECTOR
MAIN CABLE
BREAKER
MOTOR / GEAR BOX
POWER MODULE
transmiers may cause unintended movement of your electrically-powered mobility vehicle due to
EMI. Exercise cauon when using any of these items while operang your mobility vehicle and avoid
coming into close proximity of radio and TV staons.
WARNING!
The addion of accessories or components to the electrically-powered mobility
vehicle can increase the suscepbility of the vehicle to EMI. Do not modify your power chair in any
way not authorized by Freerider.
WARNING!
The electrically-powered mobility vehicle itself can disturb the performance of
other electrical devices located nearby, such as alarm systems.
NOTE:
For further information on EMI/RFI, contact your Authorized Freerider Agent. If unintended
moon or brake release occurs, turn your power chair o as soon as it is safe to do so. Contact your
Authorized Freerider Agent to report the incident.
GETTING TO KN O W Y OUR POWER CHA I R
THE FR-168W POWER CHAIR
The FR-168W Power Chair has two main assemblies:
The seat assembly and the power base assembly. See gure 4. Typically, the seat assembly includes
the seat, armrests, and joysck. The power base external assembly includes body shroud, two drive
wheels, two rear caster wheels, two front an-p wheels, front rigging, and wiring harnesses. (See
gure 4).
1
2
3
7
6
5
4
8
SEAT ASSEMBLY
1.SEAT
2.ARMRESTS
3.JOYSTICK
POWER BASE ASSEMBLY
4.DRIVE WHEEL
5.ANTI-TIP WHEEL
6.FRONT RIGGING
7.BODY SHROUD
8.CASTER WHEEL
Figure 5.FR-168W Power base external parts.
The power base internal assembly:
The power base internal assembly includes two motor/gear box assemblies, baeries, breaker, main
cable, power module, power connector. (See gure 6).Figure 6.FR-168W Power base internal parts
Figure 6.FR-168W Power base internal parts.
Figure 4.FR-168W Power chair.