Installation & Assembly





Page 2 / 4
• Attach Front Leg (A) and Back Leg (B) to Top Bar
(C) using Bolts (M) and M8 hardware (X+W+Z).
• Connect Back Support (F) to Back Legs (B) using
Bolts (N) and M6 hardware (X+W+Z).
• Fasten Side Table Panels (D) to the front and back
legs using Bolts (O) and M6 Washers (X).
• Attach Right Armrest (J) and Left Armrest (J1)
to Seat (G) using Bolts (R) and M8 hardware
(X+W+Z).
• Connect Seat Back (H) to the armrests using Bolts
(S) and M8 hardware (X+W+Z).
• Connect Swing Arms (E) to the back-side of
each armrest using Bolts (Q) and M8 hardware
(X+W+Z).
• Connect Swing Arms (E) to the front of each
armrest using Bolts (P) and M8 hardware (X+W+Z).
• Secure the top of the swing arms with Extension
Springs (I).