Installation & Assembly

ManualsBrandsFreenotes Harmony Park ManualsCommercial Playground EquipmentSwirl Inground Mount

Table Of Contents

80" Adult

71" Ages 7-11

63" Ages 5-7

59" Ages 3-5

Main Features:

(LH) C Major / (RH) A Minor Pentatonic

•

Recycled HDPE Frame

•

Anodized Aluminum Chimes & Resonators

•

Stainless Steel Hardware

•

Contents:

SHEET 2 - Parts List and Instrument to Post Installation

•

SHEET 3 - In Ground Installation

•

SHEET 4 - Surface Mount Installation

•

Weights:

Instrument Weight, 197lbs.

•

Boxed Instrument Weight, 215lbs.

•

Boxed Posts Weight, 65-87lbs.

•

SWIRL

INSTALLATION GUIDE

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF

FREENOTES HARMONY PARK. ANY

REPRODUCTION IN PART OR AS A

WHOLE WITHOUT THE WRITTEN

PERMISSION OF FREENOTES HARMONY

PARK IS PROHIBITED.

FREENOTES HARMONY PARK

194 BODO DRIVE, UNIT F

DURANGO CO 81303

TEL: (970) 375-7825

FAX: (970) 247-0856

WWW.FREENOTESHARMONYPARK.COM

SHEET 1 OF 4

TITLE:

SCALE: 1:16

REVISION: B

DATE: 2/9/2018

DWG. NO.

Swirl - Installation Guide

SWRL-INSTALL

Summary of content (4 pages)

PAGE 1
INSTALLATION GUIDE FREENOTES HARMONY PARK 194 BODO DRIVE, UNIT F DURANGO CO 81303 TEL: (970) 375-7825 FAX: (970) 247-0856 WWW.FREENOTESHARMONYPARK.COM 1 54 4" 5 7 8" Contents: • SHEET 2 - Parts List and Instrument to Post Installation • SHEET 3 - In Ground Installation • SHEET 4 - Surface Mount Installation Weights: • Instrument Weight, 197lbs. • Boxed Instrument Weight, 215lbs. • Boxed Posts Weight, 65-87lbs.
PAGE 2
Parts List: 1 2 3 4 5 6 7 8 9 10 11 Swirl Instrument Assembly Large SS Holster In Ground Recycled Post, 96"lg. In Ground Steel Post, 96"lg. Surface Mount Steel Post, 60"lg. #8 Flat Head Screw, .5"lg. SS, T15 tamp #8 Button Head Screw, 1.25"lg. SS, T15 tamp #10-24 Button Head Machine Screw, 1"lg. SS, T25 tamp 3/8"-16 Wedge Expansion Anchor, 3.75"lg. SS 35/64" Hex Nut Cap Security Driver In Ground Recycled Post/QTY. 1 2 2 12 12 1 In Ground Steel Post/QTY. 1 2 2 12 12 1 Surface Mount Steel Post/QTY.
PAGE 3
Step 1: Excavate two 10" diameter holes, 36" deep, and 32" on center at the installation location. Contractor can modify Post to desired height. Post Length = Frost Depth (36" Recommended) + Finished Post Height Finished Post Height Guideline: (Ages 3-5, 39") (Ages 5-7, 43") (Ages 7-11, 51") (Adult, 60") Step 2: With two people, lower the Posts with the Instrument attached into the excavated holes. Step 3: Verify the correct placement, levelness, and finished height of the Instrument.
PAGE 4
Step 1: Standard height for Surface Mount Posts are 60". The height of Surface Mount Steel Posts can not be adjusted. Step 2: Determine installation location. Verify concrete footing is a minimum of 48" long x 30" wide x 6" thick. If the concrete pad is at an angle, steel washers are required to act as shims (Shims not provided). If there is not already an existing pad, approximately (9) 80lb. bags will be needed. Allow concrete to cure per concrete manufacturers guidelines.