Installation Instructions

ADS-B FDL-DB Dual Band Series
Installation Manual
Document No. 88552 Rev A
5-22
FFS Copyright © 2020 All rights reserved.
5.2.2 Terminal Maintenance Commands
The available maintenance commands are summarized in the table below:
Command
Description
ads
Display data from the altitude/air data input
bit
Display built-in test status
clear
Clear the terminal screen
comm
Display communication ports’ status - continuous
control
Display control squawk and mode status
cnfg
Display configuration data
gps
Display data from the GPS input
help or ?
Display command help
info
Display info – S/N, operation hours, versions, etc.
Reset
Reset and restart the unit
rxstatus
Display receiver status info – continuous
set <item> <value>
Set a configuration item’s value
stop
Stop continuous data outputs
cnfg defaults
Reset configuration to defaults
All screenshots in the following sections are taken from the FDL-978-XVR configuration with no
feature upgrade applied. Feature upgrades will introduce new configuration options that will be
described underneath each screenshot. FDL-978-RX configurations will have a limited subset
of available commands and options shown for the FDL-978-XVR.
5.2.2.1 “help or ?” Command
This command displays a list of available commands as shown below: