Installation Instructions

ADS-B FDL-DB Dual Band Series
Installation Manual
Document No. 88552 Rev A
FFS Copyright © 2020 All rights reserved.
1-9
1.5 Technical Characteristics
U.S. standard units of measure are the primary means of identifying dimensions,
weights, etc. The equivalent metric values may also be shown in brackets (e.g. 1.9
in [48 mm]).
1.5.1 FDL-DB Series
Specification
Characteristics
ENVIRONMENTAL COMPLIANCE
See SECTION 3
TSO COMPLIANCE
C154c (A1H/A1S)
C166b (A1S/A1) /Type 1 - Receive Only
C157b (Class 1) Incomplete System
C195b (Class C1 and C5)
C145d (Beta 1) – Internal GPS models only (PNs 87334-00-
FX00, 87334-00-FR00)
FCC IDENTIFICATION
T7YFDLDBXXXX
SOFTWARE
RTCA/DO-178B Level C
HARDWARE
RTCA/DO-254 Level C
PHYSICAL DIMENSIONS
Height
1.7 in [43.18 mm]
Width
5.0 in [127 mm]
Depth
5.5 in [139.7 mm]
WEIGHT
0.94 lb [426 g] with no internal GPS
1.05 lb [476 g] with internal GPS
OPERATING TEMPERATURE
-40°F to +158°F [-40°C to +70°C]
STORAGE TEMPERATURE
-67°F to +185°F [-55°C to +85°C]
ALTITUDE
50,000 feet
POWER REQUIREMENTS
10 – 40 Volts DC, Typical 0.22 A (0.34 A with GPS) @ 28 VDC,
Peak 0.72 A (0.84 A with GPS) @ 28 VDC
TRANSCEIVER FREQUENCY
978 MHz Transmit & 978 MHz and 1090 MHz Receive
TRANSMITTER POWER
40 Watts max at antenna after 2dB connector/cable loses
RECEIVER SENSITIVITY
-99 dBm 978 MHz and -80 dbm 1090 MHz