Installation Instructions

ADS-B FDL-DB Dual Band Series
Installation Manual
Document No. 88552 Rev A
1-2
FFS Copyright © 2020 All rights reserved.
“This article meets the minimum performance and quality control standards required by
a technical standard order (TSO). Installation of this article requires separate approval.”
CDTIs integrated with this article must be analysed for latency. This article’s ownship
and traffic total latency is <1.25 seconds and the uncompensated latency is 0 seconds
from current UTC second (not including serial data transmission time).
❖ The antenna installation must comply with the specifications in Section 2.10 for UAT
antennas and Section 2.12 for GPS antennas.
Certified installations must be approved by a Supplemental Type Certificate (STC)
or Type Certificate (TC)
1.1.2 FCC Warning
RF Exposure Warning – while this device is operating a minimum distance of 4 cm
from the antennas should be maintained to all persons nearby.
1.1.3 Non-TSO Functions
The FDL-DB Series does not contain any functions outside the scope of the above TSO
certifications