Assembly Instruction

Before you begin to assemble your piece of furniture, please check to ensure that all parts have been supplied.
Follow instructions closely as deiation from them may void your warrantly and present a possible safety risk.
It is recommended that assembly is done on a soft surface like carpet to avoid any damage.
If you experience any problems with your new purchase please phone our Customer Service Hotline [phone]
(Customers outside Australia should contact their closest Freedom store.)
Care Information:
Peroidically check and re-tighten any fasteners. Wipe down all surfaces surfaces with weekly with a clean cloth.
Do not clean any harsh abrasives or chemicals.
Clean Galss using a recognised glass cleaning product. Avoid any overspray. Although Tempered Glass is stronger than
normal galss it must still be treated with care.
Hardware
Parts
Page 1
The Zed Corner is used to join together:
- two desks
- one desk and one return
- two returns
Zed Corner
7 X Part A 4 X Part B
1 X Part C
1 X Part D 1 X Part E
Step 1.
Remove all Glass Tops.
Remove Shoulder bolts as shown in
diagram.