Assembly Instruction

GENERAL
Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly with a clean cloth. Do not clean any surfaces with
harsh abrasives or chemicals.
METAL
Dust regularly using a clean cloth. Chrome finish can be polished using a dedicated metal cleaning product.
TIMBER / TIMBER VENEER
Dust weekly using a clean cloth. Use table cloths, table runners and coasters to help protect the surface. Avoid placing hot items
directly on the surface. Avoid direct sunlight as this will cause the colour to change. If the product is in direct sunlight, move
items such as vases around to avoid spotting. For Beech and Zebrano colours use only Freedom recommended polishes and
waxes every 3 - 6 months. Avoid polishes with high amounts of silicone and petroleum distillate.
- Place the Top Leg on the ground as shown.
- Align and fit the Lower Leg to the Top Leg.
- Secure the legs using the Long Bolt, Washers
and the Nut.
Assembly information:
Do not over tighten bolts or nuts until the end
of the assembly.
1 x Long Bolt 4 x Small Bolts 1 x Nut 6 x Washers 1 x Allen Key 1 x Spanner
1 x Table Top 1 x Lower Leg 1 x Top Leg
Top Leg
Lower Leg
Long Bolt
Washer
Washer
Nut
Assembly Instructions
Venus Dining Table
Care Information
Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.
Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.
It is recommended that assembly is done on a soft surface like carpet to avoid any damage.
If you experience any problems with your new purchase please phone our Customer Service Hotline [phone] (Customers
outside Australia should contact their closest Freedom store.)
Hardware
Parts
Step: 1
Page 1