Assembly Instruction

Assembly Instructions
Tess Dining Table
Page 1
Hardware
Parts
Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.
Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.
It is recommended that assembly is done on a soft surface like carpet to avoid any damage.
If you experience any problems with your new purchase please phone our Customer Service Hotline [phone] (Customers
outside Australia should contact their closest Freedom store.)
4xPart A
4xPart B
20xPartC
1xPart D
1xPart E
4xPart F
1xPart G
1xPart H
Care Information
Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly using a clean cloth.
Wash down the wicker in a mild solution of warm soapy water using a soft brush every 6 months. Rinse with clean water and
dry thoroughly. Do not clean any surfaces with harsh abrasives or chemicals or use high pressure hoses.