Assembly Instruction

Page 1 of 5Freedom Customer Service: 1300 135 588www.freedom.com.au
Signature (65cm) Side Table
Thank you for purchasing the
Signature Side Table
.Before you begin to assemble your new piece of
furniture,please check to ensure that all hardware and parts have been supplied.This page lists all contents
included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may void your
warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage.
If you experience any problems with your new purchase please phone Freedom Customer Service (FCS)
on 1300 135 588. Customers outside Australia should contact their closest Freedom store.
Care Information
Hi Gloss
Periodically check and re-tighten any fasteners.Avoid direct sunlight.Dust the surface weekly using a soft
cloth.Please note that high gloss surfaces are delicate and with everyday use you must expect signs of
wear on the surface of the product.It is important to remove moist substances immediately.Remove stains
with a soft cloth to avoid marks on the surface.Use coasters,placemats and table runners to assist in
prolonging the life of your product.
Timber
Periodically check and re-tighten any fasteners.Dust weekly using a soft,clean cloth.Do not use harsh
abrasives,chemicals or polishes containing silicone.Avoid direct sunlight as this will cause the timber to
change colour.It is important to remove moist substances immediately.Use coasters, placemats and table
runners to assist in prolonging the life of your product.
Stone
Periodically check and re-tighten any fasteners.Avoid direct sunlight.Dust the surface weekly using a soft
cloth.Avoid cleaning products unless the label specifies it is safe for natural stone.Please note that stone
surfaces are delicate and with everyday use you must e
xpect some visual signs of wear on the surface of
the product.It is important to remove moist substances immediately.Remove stains with a soft cloth to
avoid marks on the surface.Use coasters,placemats and table runners to assist in prolonging the life of your
product.
Metal
Periodically check and re-tighten any fasteners.Avoid direct sunlight.Dust the surface weekly using a soft
cloth.Please note that metal surfaces with everyday use,you must expect some visual signs of wear on the
surface of the product.It is important to remove moist substances immediately.Remove stains with a soft
cloth to avoid marks on the surface.
23358690,23358713