Installation Guide

7
Base Plate Assembly For Line Post When Surface Mounting
Installation for Surface Mount Posts
Base Plate Assembly For End Post When Surface Mounting
a.) Attach plate to the bottom of the line post.
b.) Align counter-sunk plate holes with post boss.
c.) Insert the four (4) 2
1
⁄
1
⁄
1
2
⁄2⁄
" screws provided in the post kit into the screw boss using a Phillips bit and a drill.
DO NOT attempt to install by hand.
a.) Attach plate to the bottom of the end post.
b.) Align counter-sunk plate holes with post boss.
c.) Insert the four (4) 2
1
⁄
1
⁄
1
2
⁄2⁄
" screws provided in the post kit into the screw boss using a Phillips bit and a drill.
DO NOT attempt to install by hand.
Fig. B
Fig. B
Fig. A
Top of Post
Bottom of Post
Fig. A
Top of Post
Bottom of Post
Fig. C
Holes not used
Fig. C
Holes not used
Attach base plate to bottom of surface mount post.
See below for each type of post assembly.
1.