Dimensions Guide

5.5.

Attach Top Rail

over Boards

working your

way from left to

right.

Slide End Boards into U-Channels.

Place Boards in Bottom Rail starting

from left to right, ensuring Boards

with U-Channels are on ends.

Add Bottom Rail into

ﬁrst Post and loosely

into second Post.

Ensure Panel is plumb

and now tightly ﬂush

against second Post.

Build-it-Yourself

Elite Vinyl Fencing

Reducing

Width

Including model no. 73013028

Simply remove Boards from Panel

and cut Rails to desired length (make

sure Rails are 4" wider than the

ﬁnished Panel size, so that the Rails

can be inserted into the Post(s).

Boards

Rail

Post

U-Channel

Contractors Tip: If cutting one of the 6" Boards is necessary to achieve the desired

Panel width, draw a line the length of the Board and slowly cut using a fine tooth saw.

Contractors Tip: For added security, add Lock Tabs to the

end of the cut Rail. Please purchase the Barrette Notching

Tool (model # 73013114) and follow the instructions.

http://www.barretteoutdoorliving.com

PAGE 1
Reducing Build-it-Yourself Width Elite Vinyl Fencing Including model no. 73013028 1. U-Channel Simply remove Boards from Panel and cut Rails to desired length (make sure Rails are 4" wider than the finished Panel size, so that the Rails can be inserted into the Post(s). Post Boards Rail Contractors Tip: If cutting one of the 6" Boards is necessary to achieve the desired Panel width, draw a line the length of the Board and slowly cut using a fine tooth saw. 2. 5.
PAGE 2
Reducing Build-it-Yourself Height Elite Vinyl Fencing 1. Including model no. 73013028 Simply remove Boards from Panel and cut boards and U-Channels to desired height. U-Channel Post Boards Rail Contractors Tip: Creating an Angled Panel 1. Keep in mind the Top Rail will be longer than the Bottom Rail due to the angle. Make sure it is long enough to cover the width of the Panel once the angled cut is made. Contractors Tip: Scalloped Panels are numbered on the bottom of the Boards.