PARTS MANUAL Gizmo Tilt FREEDOM DESIGNS, INC. 2241 N. Madera Rd. Simi Valley, CA 93065 ● (800) 331-8551 www.freedomdesigns.
Terms & Conditions Dealer Accounts & Terms Cancellations A Freedom Designs, Inc. dealer application must be completed and approved before an account can be established. Freedom Designs standard terms for open accounts are net 30 days, unless other terms are agreed upon. Completed orders will not be shipped and new orders will not be processed on accounts with outstanding balances over 60 days.
TABLE OF CONTENTS Components Page Accessories ………………………………………………. Anti-tippers ………………………………………………. Anti-tippers—Swing Sway ………………………………………………. Anti-tippers—Fixed ………………………………………………. Armrests ………………………………………………. Adjustable Height, Standard ………………………………………………. Adjustable Height, Pediatric ………………………………………………. Flip Back & Locking ………………………………………………. Axles ………………………………………………. Back Canes ………………………………………………. Caster Forks ………………………………………………. Caster Parts ………………………………………………. Caster Wheels ……………………………………………….
TABLE OF CONTENTS Components Wheel Locks Standard Wheel Locks Hub Locks -Thru Serial #GZ-12528 From Serial #GZ-12529 Wheels Wheel Assemblies Wheel Assemblies for Hub Locks Wheel Options Limited Warranty Page ………………………………………………. ………………………………………………. ………………………………………………. ………………………………………………. ………………………………………………. ………………………………………………. ………………………………………………. ………………………………………………. ………………………………………………. 38-40 38 39 40 41-44 41 42 43 44 Gizmo Tilt FREEDOM DESIGNS, INC.
ACCESSORIES 5 6 7 2 1 3 4 See notes for ordering information 9 8 See notes for ordering information 10 PROTECTS AND PADS CHAIR FRAME (HOOK & LOOP ATTACHMENT) 11 Available on 14” and wider chairs only 12 15 13 19 16 14 17 18 Notes: To order Leverage Bar Kit or Flip Down Rigid Bar Kit add chair width to end of part number (e.g. 10915-14 for 14” wide) No. PART # DESCRIPTION QTY No. PART # 13 Fabric Clothing Guard Panel 1 ea.
ANTI-TIPS—Swing Away 33 1 12 13 2 13 10 12 14 9 5 8 6 9 8 9 10 4 13 No. PART # 1 2 3 14 DESCRIPTION 11 QTY No. PART # 7 14 DESCRIPTION QTY 8005 Swing Away Anti-tip / Axle Mount Plates—R & L 1 pr. 5 8003 Clamp 1 ea. 1 pr. 6 8004 Clamp Spacer 1 ea. Swing Away Anti-tip Lever Assembly—Rt 1 ea. 7 8007 Anti-tip Roller Tube 1 ea. 10073-L Swing Away Anti-tip Lever Assembly—Lt 1 ea. 8 9009A Roller 1 ea. 10072-R Swing Away Anti-tip Assembly—Right 1 ea.
ANTI-TIPS—Fixed 1 9 10 6 3 2 5 9 No. 1 10 PART # 4 5 10 8 7 5 QTY No. PART # 10071-R Anti-tip Assembly—Fixed, Right 1 ea. 5 9010 Washer—1/4” Plastic 1 ea. 10071-L Anti-tip Assembly—Fixed, Right 1 ea. 6 8999 Plastic Saddle—3/4” 1 ea. Anti-tip Assemblies—Fixed, (Rt & Lt) 1 pr. 7 9023 Screw—1/4-20 x 2” Hex Head 1 ea. 10069-1 Anti-tip Lever Tube 1 ea. 8 9025 Screw—1/4-20 x 2 1/2” Hex Head 1 ea. 10069-2 Anti-tip Lever Tubes 1 pr.
ARMREST—Adjustable Height, Standard 1 16 3 17 13 9 12 11 22 15 2 21 7 21 10 18 8 5 20a/b 6 4 No. PART # DESCRIPTION QTY No. 1 10756-R T-Arm Assembly—Complete, Right 1 ea. 10 10756-L T-Arm Assembly—Complete, Left 1 ea. T-Arm Assemblies—Comp., Rt & Lt 1 pr. 11 10757-R Lower T-Arm Assembly—Right 1 ea. 10757-L Lower T-Arm Assembly—Left PART # DESCRIPTION QTY 10766-STD Front Tube—Standard 1 ea. 10767 Panel 1 ea. 12 10768 Receiver Tube Cap 1 ea. 1 ea.
ARMREST—Adjustable Height, Pediatric 3 1 19 8 9 12 21 14 25 18 22 13 24 11 23 10 2 8 15 25 6 7 STANDARD SEAT WIDTH REQUIRES (1) INNER CLAMP (ITEM 5) AND USES 1-1/4” LONG MOUNTING SCREW (ITEM 21a) EXTENDED SEAT WIDTH REQUIRES (2) INNER CLAMPS AS SHOWN AND USES 1-1/2” LONG MOUNTING SCREWS (ITEM 21b) 5 4 16 No. PART # 1 2 QTY No. PART # 10780-R T-Arm Assembly, Ped. Complete—Rt. 1 ea. 11 10766-P 10780-L T-Arm Assembly, Ped. Complete—Lt. 1 ea. 12 10780 T-Arm Assemblies, Ped. Cmplt.
ARMRESTS—Flip Back 19 1 8 10 17 18 19 13 6 11 15 9 19 12 20 8 10 7 3 5 14 ● FLIP BACK 17 19 6 21 18 7 16 4 2 ● LOCKING FLIP BACK No. PART # DESCRIPTION QTY 1 10721 Flip Back Armrest Assemblies—16” 1 pr. 2 3 4 5 No. PART # 5022 DESCRIPTION QTY Foam Pad—9.5” 1 ea. 10721-R Flip Back Armrest Assy—Rt.—16” 1 ea. 8 9005 1” Plastic Saddle 1 ea. 10721-L Flip Back Armrest Assy—Lt.—16” 1 ea. 9 6004-R Adjustment Plate—Right 1 ea.
AXLE COMPONENTS 9 10 1 10 1 6 7 8 11 2 4 3 12 5 - Axle Kits No. PART # 1 4002 4003 2 11 4004-R 4004-L DESCRIPTION QTY No. PART # DESCRIPTION QTY Axle Plate—12, 16 & 18” Wheels 1 ea. 6 9022 Screw—1/4-20 x 1 3/4” Hex Head 1 ea. Axle Plate—20, 22 & 24” Wheels 1 ea. 7 9048 Screw—1/4-20 x 1 1/4” Flat Head 1 ea. Adapter Plate—Right 1 ea. 8 9051 Screw—1/4-20 x 2 Flat Head 1 ea. Adapter Plate, Hub Lock—Left 1 ea. 9 9072 Locknut—1/4-20 Nylon 1 ea.
BACK CANES & STROLLER HANDLES 18 4 19 3 15 14 16 1A 1 13 17 5 5 2 20 4 11 12 10 21 12 *To order One Piece and Push Button Adjustable Stroller Handles (item numbers 18 & 19), please specify width after part number e.g. 10625-12 is 12” wide. No. PART # 1 1A 2 9 8 9 7 6 DESCRIPTION QTY No. PART # 13200 Gizmo Back Canes—Short 1 pr. 11 9088 Locknut—5/16-18 Nylon 1 ea. 13201 Gizmo Back Canes—Medium 1 pr. 12 9090 Washer—5/16” Flat 1 ea.
CASTER COMPONENTS—Forks 1 4 6 5 18 16 15 15 7 15 3 10 17 13 14 5 18 16 15 12 15 2 15 9 17 8 14 13 No. PART # 1 10040-1 10040-2 2 3 4 DESCRIPTION 11 QTY No. PART # DESCRIPTION QTY 3” Caster Fork Assembly 1 ea. 8 2011C 4” Caster Fork 1 ea. 3” Caster Fork Assemblies 1 pr. 9 2011A 5”, 6” & 7” Caster Fork 1 ea. 6” x 2” Caster Fork 1 ea. Caster Spacer (except 6 x 2 casters) 1 ea. 10052-1 4” Caster Fork Assembly 1 ea.
CASTER COMPONENTS—Mounting CASTER PARTS 1 2 4 14 15 13 9 10 12 3 4 11 6 5 No. PART # 1 2008-B 7 DESCRIPTION 8 QTY No. PART # Caster Housing / Plates & Cams 1 pr. 9 2012 2008-R Caster Housing / Plates & Cams—Rt 1 ea. 10 2008-L Caster Housing / Plates & Cams—Lt 1 ea. DESCRIPTION QTY Eccentric Nut 1 ea. 13041-R Caster Adapter Plate—Right 1 ea. 13041-L 1 ea. Caster Adapter Plate—Left 2 2008A Caster Housing Assembly / Bearings 1 ea.
CASTER COMPONENTS – Wheels & Bearings 1 3 2 5 4 8 6 7 10 9 12 11 13 No. 1 2 3 4 5 6 7 PART # DESCRIPTION QTY 10141-1 3” Micro Light Up Caster 1 ea. 10141-2 3” Micro Light Up Casters 1 pr. 10142-1 3” Micro Caster 1 ea. 10142-2 3” Micro Caster 1 pr. 10152-1 4” Micro Caster 1 ea. 10152-2 4” Micro Casters 1 pr. 10153-1 4” Micro Light Up Caster 1 ea. 10153-2 4” Micro Light Up Casters 1 pr. 10143-1 5” x 1” Poly Caster 1 ea. 10143-2 5” x 1” Poly Casters 1 pr.
CROSS BRACES—From Serial No. GZ-15000 15 6 See Page 15 for Growth Kits 11 KIT INCLUDES ALL ITEMS EXCEPT 2, 4, 10 & 12 19 17 8 15 13 18 7 5 2R 15 10 2L 14 16 18 9 15 1 15 14 4 12 3 15 *Item #1 Cross bar Serial numbers GZ-13700 and up require cross bars with bottom inside diameter of 3/4” diameter. No. PART # 1 20030 20031 2 DESCRIPTION QTY No. PART # DESCRIPTION QTY Gizmo Cross Tube—10” 1 ea. 6 9095-99 Folding Strap 1 ea. Gizmo Cross Tube—11” 1 ea.
CROSS BRACE GROWTH KITS—Folding & Rigid GROWTH KIT OPTIONS Please provide serial number Cross Braces & Footplates PART # DESCRIPTION 20001FP 11” Cross Brace Assembly / Footplates 1 set 20002FP 12” Cross Brace Assembly / Footplates 1 set 20003FP 13” Cross Brace Assembly / Footplates 1 set 20004FP 14” Cross Brace Assembly / Footplates 1 set 20005FP 15” Cross Brace Assembly / Footplates 1 set 20006FP 16” Cross Brace Assembly / Footplates 1 set 20007FP 17” Cross Brace Assembly / Footplates 1 se
CROSS BRACES—(discontinued) Serial Nos. GZ-12400 thru GZ-14999 Cross Brace Clamp Serial Nos. GZ-12400 thru GZ-13699 Cross Brace Tube 1 To replace cross braces for serial numbers GZ-13700 to GZ-14999 refer to page 14 of this manual. Please provide frame serial number and chair width. No. PART # DESCRIPTION QTY 1 13130 Gizmo Cross Tube Replacement Kit—10” 1 ea. 13131 Gizmo Cross Tube Replacement Kit—11” 1 ea. 13132 Gizmo Cross Tube Replacement Kit—12” 1 ea.
CROSS BRACES—(discontinued) Serial No. up to GZ-12399 Contact Customer Service for all cross brace replacement parts . Please provide frame serial number, chair width, and chair depth. Gizmo Tilt FREEDOM DESIGNS, INC.
FOOTRESTS—Composite Flip-up Footplate This footplate is only for use with footrest hangers or elevating legrest shown on pages 28, 29 & 32. 1 4 3 4 7 5 No. PART # 1 20071 QTY No. PART # 2 5 DESCRIPTION QTY Footplate Assemblies—12-13” 1 pr. 20075-L Footplate—12-13”, Left 1 ea. 20071-R Footplate Assembly—12-13”, Right 1 ea. 20076-R Footplate—14-15”, Right 1 ea. 20071-L Footplate Assembly—12-13”, Left 1 pr. 20076-L Footplate—14-15”, Left 1 ea.
FOOTRESTS—Flip Up Footplate Serial numbers GZ-18650 & up 1 This footplate hinge is only for use with hangers or elevating legrest shown on pages 28, 29 & 32. 9 5a 11 5 12 6 3 4 10 8 2 7 No. PART # 1 20050 Flip Up Footplate Assy, 10-11” QTY No. 1 pr. PART # 20051-L QTY Pivot Arm Assembly—Left 1 ea. 1 ea. 20050-L Flip Up Footplate Assy, 10-11”, Lt. 1 ea. Pivot Arm—Left 1 ea. Flip Up Footplate Assy, 12-13” 1 pr. 4 20066 Footplate Swivel Clamp 1 ea.
FOOTRESTS—90° Flip Up Footplate (discontinued) Through serial number GZ-18649 1 10 3 12 5 7 14 8 13 11 Must be used with footrest hangers or elevating legrests shown on pages 30, 31 & 33. 9 No. PART # 1 13031 DESCRIPTION Flip Up Footplate Assy, 90°, 10-11” 2 7 6 QTY No. PART # DESCRIPTION QTY 1 pr. 4 3019 Footplate—Flip Up Angle Adj., 10-11” 1 ea. 13031-R Flip Up Footplate Assy, 90°, 10-11, Rt. 1 ea. 3020 Footplate –Flip Up Angle Adj., 12-13” 1 ea.
FOOTRESTS—75° Flip Up Footplates (discontinued) Through serial number GZ-18649 1 10 3 4 13 12 7 14 8 5 11 Must be used with footrest hangers shown on pages 30 & 31. 9 No. PART # 1 13036 DESCRIPTION Flip Up Footplate Assy, 75°, 10-11” 2 7 6 QTY No. PART # 1 pr. 4 DESCRIPTION QTY 3019 Footplate—Flip Up Angle Adj., 10-11” 1 ea. 13036-R Flip Up Footplate Assy, 75°, 10-11, Rt. 1 ea. 3020 Footplate –Flip Up Angle Adj., 12-13” 1 ea. 13036-L Flip Up Footplate Assy, 75°, 10-11”, Lt.
FOOTRESTS—Removable Footboard 1 14 3 6 5 10 13 11 2 5 4 9 16 15 15 No. PART # 1 2 3 4 DESCRIPTION QTY No. PART # 16 8 7 8 16 12 DESCRIPTION QTY 10200 Removable Footboard Assy, 10-11” 1 ea. 3033 Spacer Tube, 12—13” 1 ea. 10201 Removable Footboard Assy, 12-13” 1 ea. 3034 Spacer Tube, 14—15” 1 ea. 10202 Removable Footboard Assy, 14-15” 1 ea. 3035 Spacer Tube, 16—17” 1 ea. 10203 Removable Footboard Assy, 16-17” 1 ea. 3036 Spacer Tube, 18” 1 ea.
FRAMES—Base (from serial no. GZ-15000) 15 14 9 10 16 Seat frames (item 1) are the same for both latch style and pop-up footrest hangers. 12 Seat frame shown is for pop up footrest hanger. 5 4 11 16 7 13 Hanger latch components not supplied with the seat frame. Re-use components from original frame or order new parts on page 24. 9 8 3 9 1 13 6 13 2 9 8 No. PART # 1 20010F Frame—Front, X-Small 1 ea. 20011F Frame—Front, Small 1 ea. 20012F Frame—Front, Medium 1 ea.
FRAME GROWTH KITS From Serial # GZ-15000) For latch style and pop up hangers X SMALL PART # DESCRIPTION SMALL QTY PART # DESCRIPTION QTY 20014S Seat Frame 1 pr. 20015S Seat Frame 1 pr. 20014B Base Frame 1 pr. 20015B Base Frame 1 pr. 20014C Complete Frame (Base & Seat) 1 pr. 20015C Complete Frame ( Base & Seat) 1 pr. MEDIUM PART # DESCRIPTION LONG QTY PART # DESCRIPTION QTY 20016S Seat Frame 1 pr. 20017S Seat Frame 1 pr. 20016B Base Frame 1 pr.
FRAMES—Base (discontinued) BASE FRAMES ( serial nos. GZ-12400 thru GZ-14999 ) 4 22 11 1 12 15 7 15 9 6 14 12 3 10 1 12 7 8 13 2 10 5 7 Notes: 1. When ordering items 1 (front frame), 2 (rear frame), and/or items 8 & 9 (support clamps), please order frame kit item 16—chair length must be specified. 2. When ordering item 3 (cross brace hinge), please order cross brace kit item 17. Kit includes (2) cross brace hinges, and (2) cross brace tubes—chair width must be specified. No.
FRAMES— Base (discontinued) BASE FRAMES ( thru serial no. GZ-12399 ) Contact Customer Service for all frame replacement parts . Please provide frame serial number, chair width, and chair depth. Gizmo Tilt FREEDOM DESIGNS, INC.
HANGERS — Complete Hanger Retro & Components Latch Style 4 1 2 5 3 7 6 No. PART # 1 13020 2 20090 DESCRIPTION QTY No. PART # Hanger Support—Latch Style 1 ea. 5 9035 Screw—1/4-20 x 1 1/2” Button Head 1 ea. Retainer Plug 1 ea. 6 9074 Washer—1/4” Flat 3 9100 Binding Screw—Female 1 ea. 4 9101 Binding Screw—Male 1 ea. 7 20079 20079-1 Pop Up Style DESCRIPTION QTY 1 ea.
HANGERS—Latch Style Serial number GZ-18650 & up 4 11 2 1 5 11 9 9 8 8 10 10 6 7 3 10 10 These hangers require footplate assemblies shown on pages 18 & 19. No. PART # 1 20080-R 20080-L 3 1 ea. 1 ea. 1 pr. 20081-R Hanger Assembly—75°, Rt. 20081-L No. PART # 20085-L QTY Latch Style Hanger Tube—75°, Lt. 1 ea. Latch Style Hanger Tubes —75° 1 pr. Latching Assembly—90° - Rt. 1 ea. 1 ea. 20091-L Latching Assembly—90° - Lt. 1 ea. Hanger Assembly—75°, Lt. 1 ea.
HANGERS—Pop Up Serial numbers GZ-18649 & up 2 1 8 10 8 10 6 6 7 11 11 4 7 5 9 9 3 These hangers require footplate assemblies shown on pages 18 & 19. No. PART # 1 20086-1 QTY No. PART # DESCRIPTION QTY Pop Up Hanger Assembly—90° 1 ea. 4 20089-1 Pop Up Hanger Support Tube—90° 1 ea. Pop Up Hanger Assemblies—90° 1 pr. 5 20088-1 Pop Up Hanger Support Tube—75° 1 ea. Pop Up Hanger Assembly—75° 1 ea. 6 3013 Pivot Fitting 1 ea. Pop Up Hanger Assemblies—75° 1 pr.
HANGERS—Latch Style (discontinued) Through serial number GZ-18649 4 11 2 1 9 5 11 3 9 8 8 10 10 6 7 9 9 These hangers require footplate assemblies shown on pages 20 and 21. No. 1 Part # 1 ea. 14070-L Latch Style Hanger Assy—90°, Lt. 1 ea. 4 Latch Style Hanger Assemblies 1 ea. 14071-L Hanger Assembly—75°, Lt. 1 ea. Hanger Assemblies—75° 1 ea. 13026-2 Hanger Extension Assemblies— 0.5—4.5” Long 1 pr. 13027-1 Hanger Extension Assembly— 2.5—6.5” Long 1 ea.
HANGERS—Pop Up (discontinued) Through serial number GZ-18649 1 8 2 10 10 6 8 7 6 11 7 11 5 4 9 9 3 These hangers require footplate assemblies shown on pages 20 and 21. No. PART # 1 10101 2 10100 3 4 QTY No. PART # DESCRIPTION QTY Hanger Assembly—90° 1 ea. 5 1008 Hanger Support Tube—75° 1 ea. Hanger Assembly—75° 1 ea. 6 3013 Pivot Fitting 1 ea. 13026-1 Hanger Extension Assembly— 0.5—4.5” Long 1 ea. 7 1015 Alignment Guide 1 ea.
HANGERS—Pop Up Elevating Legrest 16 7 21 This legrest must be used with new flip up footplate assembly (see pages 18 & 19) 2 15 1 11 6 8 10 12 16 23 3 21 5 18 19 15 19 20 No. PART # 1 14180-L 13 4 DESCRIPTION ELR Assy w/o Pad & Footplate, Left 14180-R ELR Assy w/o Pad & Footplate, Right 5 24 DESCRIPTION QTY 1 ea. 9 14191 Calf Pad Angle Stop 1 ea. 1 ea. 10 14192 Pivot Insert 1 ea. 1 pr. 11 14193 Pivot Insert Bushing 1 ea.
HANGERS—Pop Up Elevating Legrest (discontinued) 19 15 17 Through serial number GZ-18649 2 1 7 6 These elevating legrests require footplate assemblies shown on page 20. 8 22 3 14 4 21 17 9 5 20 15 18 22 23 No. PART # 1 10104-L DESCRIPTION ELR Assy w/o Pad & Footplate, Left 10104-R ELR Assy w/o Pad & Footplate, Right 3 4 5 10 11 12 QTY No. PART # 16 13 24 DESCRIPTION QTY 1 ea. 9 14205 Angle Lock Lever 1 ea. 1 ea. 10 14206 Calf Pad Flip Hinge 1 ea.
TILT MECHANISM—From Serial No. GZ-15000 8 4 13 15 10 3 15 11 5 6 2 14 15 No. PART # 1 3 4 15 12 DESCRIPTION QTY No. PART # DESCRIPTION QTY 12017-R Tilt Assy—Short Cable, Handle, Mech, Rt. 1 ea. 5 12007 Brass Collar 1 ea. 12017-L Tilt Assy—Short Cable, Handle, Mech, Lt. 1 ea. 6 12008 Tilt Spring 1 ea. 12017 Tilt Assemblies—Sht Cable, Handle, Mech 1 pr. 7 12009 Tilt Nut 1 ea. 12018-R Tilt Assy—Long Cable, Handle, Mech, Rt. 1 ea. 8 12010 Handle Mount Screw 1 ea.
TILT MECHANISM—(discontinued) Up to Serial Nos. GZ-14999 For replacement parts for this tilt mechanism, please refer to page 35 of this manual. Gizmo Tilt FREEDOM DESIGNS, INC.
REVERSE CONFIGURATION—Rear Wheel to Front Wheel 1 Standard version shown, Hub lock version available 6 3 7 11 9 5 2 11 No. 1 10 12 8 See Anti-tip section for individual parts. 12 PART # DESCRIPTION 4 QTY No. PART # DESCRIPTION QTY 7 4004-R Axle Adapter Plate—Hub Lock—Rt. 1 ea. 4004-L Axle Adapter Plate—Hub Lock—Lt. 1 ea. 11110 Reverse Configuration Kit—Std 1 kit 11110-HL Reverse Config. Kit—Hub Lock 1 kit 2 21011 Caster Receiver Clamp Assemblies 1 pr.
STANDARD CONFIGURATION—Front Wheel Drive to Rear Wheel 1 Standard version shown Hub lock version available a 5 2 6 19 17 10 7 18 3 9 16 11 17 14 19 8 13 15 4 18 12 DESCRIPTION 11 No. PART # QTY No. PART # 1 11111 Front Wheel to Rear Wheel Kit 1 kit 10 4002 2 21012 Swing Away Anti-tip/Axle Plate Assy 1 pr. 3 21014 Caster Plate Assemblies 1 pr. 11 4 8005 S. Away Anti-tip / Axle Mount Plates 1 pr. 12 8005-R S. A. Anti-tip / Axle Mount Plate—Rt 1 ea. 8005-L S.
WHEEL LOCKS—Lever Style & Accessories 6 1 5 3 11 7 2 5 4 10 9 8 No. PART # 1 5004 3 QTY No. PART # DESCRIPTION QTY Push to Lock Wheel Lock—Right (no clamp) 1 ea. 4 5025-R Pull to Lock Lever Assembly—Right 1 ea. Pull to Lock Lever Assembly—Left 1 ea. Pull to Lock Lever Assemblies 1 pr. 5005 Push to Lock Wheel Lock—Left (no clamp) 1 ea. 5025-L 10060-R Push to Lock Wheel Lock / Clamp—Right 1 ea. 5025 10060-L Push to Lock Wheel Lock / Clamp—Left 1 ea.
HUB LOCK—From Serial No. GZ-12529 4 2 COMPLETE KIT INCLUDES: 8 1 FRAME MOUNT LEVER ASSEMBLY (Item 2) A C T U A T O R A S S E M B L Y with CABLES (Item 3) Wheels sold separately 12 6 3 9 8 10 SERIAL NUMBER AND MODEL MUST BE PROVIDED ONLY AVAILABLE ON FREEDOM DESIGNS CHAIRS 13 14 QTY No. PART # 5 13080-R Actuator Assembly—Right 1 ea. 13080-L Actuator Assembly—Left 1 ea. NEW MAG WHEELS MUST BE ORDER. 7 11 5 14 SEE PAGE 50 FOR WHEEL CHOICES. No.
HUB LOCK —(discontinued) Thru Serial No. GZ-12528 Please contact Customer Service for all Hub Lock replacement parts for wheelchairs with serial numbers up to and including GZ-12528 Please provide frame serial number Gizmo Tilt FREEDOM DESIGNS, INC.
WHEELS—Assemblies 12” Poly 12” Pneumatic 16” Pneumatic 18” Pneumatic Mag Wheel 20”, 22”, 24” Spoke Wheel 20”, 22”, 24” Mag Wheel with Tire & Tube PART # DESCRIPTION QTY PART # DESCRIPTION QTY 10022-1 12” Mag Wheel With Tire & Tube 1 ea. 10026-1 20” Mag Wheel With Tire & Tube 1 ea. 10023-1 12” Polyurethane Wheel 1 ea. 10027-1 22” Mag Wheel With Tire & Tube 1 ea. 10024-1 16” Mag Wheel With Tire & Tube 1 ea. 10028-1 24” Mag Wheel With Tire & Tube 1 ea.
WHEELS—Hub Lock Assemblies Mag Wheel with Tire, Tube & Hub Lock Adapter PART # DESCRIPTION QTY PART # DESCRIPTION QTY 13210 12” Mag Wheels, Tires, Tubes, & Hub Locks 1 pr. 13214 20” Mag Wheels, Tires, Tubes, & Hub Locks 1 pr. 13211 12” Polyurethane Wheels with Hub Locks 1 pr. 13215 22” Mag Wheels, Tires, Tubes, & Hub Locks 1 pr. 13212 16” Mag Wheels, Tires, Tubes, & Hub Locks 1 pr. 13216 24” Mag Wheels, Tires, Tubes, & Hub Locks 1 pr.
WHEEL—Wheel Options Wheels Only PART # 4020 DESCRIPTION 12” Mag Wheel with Bearings QTY PART # 1 ea. 4024 DESCRIPTION QTY 22” Mag Wheel with Bearings 1 ea. 4021 16” Mag Wheel with Bearings 1 ea. 4024a 22” SpokeWheel with Bearings 1 ea. 4022 18” Mag Wheel with Bearings 1 ea. 4025 24” Mag Wheel with Bearings 1 ea. 4023 20” Mag Wheel with Bearings 1 ea. 4025a 24” Spoke Wheel with Bearings 1 ea. 4023a 20” Spoke Wheel with Bearings 1 ea.
WARRANTY Freedom Designs, Inc. Limited Warranty PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975. THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL PURCHASER/USER WHO PURCHASES THIS PRODUCT WHEN NEW AND UNUSED DIRECTLY FROM FREEDOM DESIGNS OR AN AUTHORIZED DEALER OR DISTRIBUTOR. THIS WARRANTY GIVES SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE TO STATE.
FREEDOM DESIGNS, INC. ● 2241 Madera Rd. Simi Valley, CA. 93065 www.freedomdesigns.
