User Guide

3. The first is format tool. Choose " Partition and encrypt" option, and set a desired capacity

for the encrypted disk, then choose the setting of username or password. Fill the

username in the blank "New username", and password in the blank "New password",

then input the same password again in the blank " New password Confirm " . After the

above operation, Click "Start" button, and partition starts.

4. Partition finishes with hints as follows:

5. Press "OK" , then PC may restart.

6. Two disks may be displayed after restarting (only one driver letter may be displayed when

under Windows 2K SP4). Click to access the encrypted disk (the second one), and there

are three files in it, two private files and one executable file with only 300K memory space.

7. Run the executable file "RdiskDecrypt.exe", and input username and password in dialog

box. If they are correct, disk can be accessed and files can be copied.

8. Username and password is required to access to the encrypted disk in every connection to PC.

¯ Note: Dividing one disk into two parts may erase the data in it. Please backup the data in

disk before division. And merging two parts to one may also erase the data.

¯ Warning: Do not lose the user name and password you've input, otherwise you can

not access to the encrypted disk and you have to merge the two parts to can

cel the encrypted disk with files in it losing.

Http://www.freedata.com.cn

Freedata Technology co., Ltd