User Guide

ValueLoader Administration
Retrieving Information About the ValueLoader
44 ValueLoader LTO Tape Autoloader User Manual
3 Press the [+] or [-] button until “View Event Log” appears on
the LCD screen. The LCD screen also displays the quantity of
errors and events currently stored in the event log.
4 Press the [Enter] button to access the most recently logged
event.
5 Press the [+] or [-] button to display each event in the log.
6 Press [Cancel] when done.
Product Revision 3
This option displays the product revision of the ValueLoader.
To use this option:
1 From the Home Screen or main menu, press the [+] or [-] button
until “Information” appears on the top line of the LCD screen.
2 Press the [Enter] button to access the available options.
3 Press the [+] or [-] button until “Product Rev” appears on the
LCD screen.
The LCD screen displays the revision of the firmware currently
installed in the ValueLoader.
4 Press the [Cancel] button when done.
Firmware Revision 3
This option displays the revision of the firmware currently
installed in the ValueLoader.
To use this option:
1 From the Home Screen or main menu, press the [+] or [-] button
until “Information” appears on the top line of the LCD screen.
2 Press the [Enter] button to access the available options.
3 Press the [+] or [-] button until “Firmware Rev” appears on the
LCD screen.
The LCD screen displays the revision of the firmware currently
installed in the ValueLoader.