User Guide

Operating the ValueLoader
Using Cartridges
ValueLoader LTO Tape Autoloader User Manual 31
Write-Protecting
Cartridges
2
All cartridges have a write-protect switch to prevent accidental
erasure or overwriting of data (figure 14
). Before loading a
cartridge into the ValueLoader, make sure the write-protect switch
on the front of the cartridge is positioned as desired:
• Slide the switch to the left to write-protect the cartridge. A
small orange rectangle is visible, indicating the cartridge is
write protected.
• Slide the switch to the right to allow the ValueLoader to write
data to the cartridge. The lock icon on the switch indicates that
the cartridge is write-enabled.
Figure 14 Write-
Protect Switch
Maintaining
Cartridges
2
To ensure the longest possible life for all of your cartridges, follow
these guidelines:
• Do not drop or strike a cartridge. Excessive shock can displace
the tape leader, making the cartridge unusable and possibly
damaging the ValueLoader.
• Store cartridges in their storage cases.
• Do not expose cartridges to direct sunlight or sources of heat,
including portable heaters and heating ducts.
Write protected
Write enabled
Write protect
switch
Indicator