User Guide

Installing the ValueLoader
Preparing the Host and Verifying the Connection
ValueLoader LTO Tape Autoloader User Manual 19
3 Right-click the Unknown Medium Changer Device listing, click
Uninstall, and then click the OK button to confirm that you
want to remove the device.
4 Click the Action button in the upper-left corner of the
Computer Management dialog box.
5 Click Scan for Hardware Changes. Windows 2000 scans for the
ValueLoader. The ValueLoader appears under “Medium
Changers” again.
6 Right-click the Unknown Medium Changer Device listing and
then click
Properties.
7 Select the Drivers tab.
8 Click the Reinstall Driver or Update Driver button.
9 When the Upgrade Device Driver Wizard appears, click the
Next button.
10 Click Display a list... and then click the Next button.
11 Click the Have Disk button. Type the path to where you have
saved the device drivers on your system, then click the
OK
button.
12 Click the DLT VS Medium Changer entry and click the Next
button.
13 Click the Next button again to install the driver.
14 Click the Finish button.
15 Close the Device Properties dialog box.
The ValueLoader appears in the Device Manager under Medium
Changers as
DLT VS Medium Changer. It is now ready to use.
Note: Depending on the status of your system and the exact
path taken to select the device driver, the driver may
appear as
Dltvsmc.inf.