User Guide

Installing the ValueLoader
Preparing the Host and Verifying the Connection
18 ValueLoader LTO Tape Autoloader User Manual
6 Right-click the HP Ultrium-1 SCSI Sequential Device listing and
then click
Properties.
7 Select the Drivers tab.
8 Click the Reinstall Driver or Update Driver button.
9 When the Upgrade Device Driver Wizard appears, click the
Next button.
10 Click Tape Drives and then click the Next button.
11 Click the Have Disk button. Type the path to where you have
saved the device drivers on your system, then click the
OK
button.
12 Click the DLT ValueLoader Tape Drive entry and click the Next
button.
13 Click the Next button again to install the driver.
14 Click the Finish button.
15 Close the Device Properties dialog box.
The drive appears in the Device Manager under Tape Drives as
DLT ValueLoader Tape Drive. It is now ready to use.
ValueLoader Device Driver (Windows 2000) 1
To install the ValueLoader device driver:
1 Make sure that you are logged onto the host server with
Administrator privileges.
2 Right-click the My Computer icon on the Windows desktop,
then click
Manage, and then click Device Manager.
The tape drive should be listed under the “Medium Changers”
item as “Unknown Medium Changer Device.”
Note: Depending on the status of your system and the exact
path taken to select the device driver, the driver may
appear as
Dltvstp.inf.