User Guide

Installing the ValueLoader
Choosing a Location
6 ValueLoader LTO Tape Autoloader User Manual
Choosing a Location 1
Choose a location that meets the following criteria. (See
appendix A
for more specifications.)
Table 1 Location
Criteria
Requirement Description
Work surface
(standalone
installation)
Select a location that is flat, level, sturdy, and
close to a host server. Do not place the
ValueLoader on the floor or other carpeted
surface.
Caution: Do not place the ValueLoader on its
side or upside down, or stack items
that weigh more than 15 kg (33 lbs)
on top of the ValueLoader.
Rack requirements Standard 19-inch rack with a clearance of 2U.
Room temperature 10-35° C (50-95° F)
Power source AC power voltage: 100-127 VAC; 200-240 VAC
Line frequency: 50-60 Hz
Note: Locate the AC outlet near the
ValueLoader. The AC power cord is the
product’s main AC disconnect device
and must be easily accessible at all
times.
Weight 10 kg (22 lbs)
Air quality Minimal sources of particulate contamination.
Avoid areas near frequently used doors and
walkways, stacks of supplies that collect dust,
printers, or smoke-filled rooms.
Caution: Excessive dust or debris can damage
tapes and tape drives.