Radio User Manual

Freecom MusicPal in practical usage

6.2 Media server (UPnP) in connection with the Freecom MusicPal

The following tutorial explains how you can to establish a LAN or WLAN connection to

your media server (UPnP).

6.2.1 LAN

Use a network cable (RJ45) to create a connection between your media server (UPnP)

and the Freecom MusicPal. Start the media server (UPnP) and your Freecom MusicPal.

Configure the LAN IP in the Settings submenu. If configured in your media server

(UPnP), select Use DHCP? Yes. Otherwise select Use DHCP? No and specify your IP ad-

dress yourself. After you have configured the LAN IP, select the Media server (UPnP)

menu item in the main menu. You can find further information on networks and network

basics in the Appendix.

Select Settings in your main menu after you have switched on the Freecom

MusicPal. Carry out navigation by using the Navigate rotary knob. Turn to right or

left to navigate up or down through the menu. Press the right-hand knob to confirm

your selection.

Select the LAN IP menu item in the main menu.

Decide between Use DHCP? Yes or Use DHCP? No and confirm your selection by

pressing the Navigate rotary knob.

MusicPal

Internet Radio

Media Server

Settings

Extras

Settings

Edit Favorites

WLAN Access Point

WLAN Region

LAN IP

WLAN IP