- Freecom Manual MediaPlayer-3
Table Of Contents
- Titel
- Dear customer
- Table of Contents
- General Information
- Chapter 1: Getting Started
- Chapter 2: Connecting the MediaPlayer-3 to the PC
- Chapter 3: Connection to Television
- Chapter 4: Playing Multimedia files on TV/HiFi
- Chapter 5: Remote Control
- Chapter 6: Basic Operation
- Chapter 7: Partitioning your Freecom MediaPlayer-3 (PC only)
- Chapter 8: Troubleshooting / Frequently Asked Questions (FAQ)
- Firmware Upgrade
- Technical Specifications
- Warranty
- Notice d'utilisation (Français)
- Benutzerhandbuch (Deutsch)
38
Freecom MediaPlayer-3
GB
8
Technical Specifications
Interface
Video Connections: Composite x 1
S-Video x 1
Component 1080i/ 720p?480p?480i
(Progressive Scan)
Cable not supplied.
Audio Connections: Stereo Audio (L/R) x1 Optical Digital Audio 1
(Dolby Digital & DTS)
Additional DTS Decoder required for DTS
digital output.
Output Connectors: Composite, Component, S-Video
Display (Main Set): 1.2 inch Backlit LCD 168 X 168 pixels,
4 gray Colors
USB Interface: USB Spec: USB 2.0 (High Speed
Full Speed: Max.
480Mbps)
Connector Type: USB Mini-B Type
For optimal performance the unit must be
connected to a USB 2.0 port. When con
nected to USB 1.1, the transfer speed is very
slow.
Output Performance
Video: DAC: Max80MHz/10bit
Composite: 930mVp-p (Load Impedance: 75OHM)
S-Video: Brightness(Y): 980mVp-p(75OHM),
Color(C): 260mVp-p(75OHM)
Component: Y: 965mVp-p(75OHM) Pb/Pr:680mVp-p
(75OHM)
Audio: Audio DAC 96KHz 24bit
Frequency +/- 2dB (20Hz to 20KHz)
Response
S/N Ratio 70dB or over