- Freecom Manual MediaPlayer-3

Table Of Contents

3.2 Connecting the audio cables to TV/ Amplifier

Connect only one audio cable type directly to your AV system. Connection

depends on the connectors available on your AV set.

AUDIO OUT (L/ R) jacks: To hear the sound of this Player through your TV

or HiFi set, connect the audio cables (white/red) to the AUDIO IN jacks on the

TV or AUX IN on your amplifier (cable supplied).

OPTICAL: The digital 5.1 channel connection provides the best sound

quality. It requires an A/V receiver that supports AC3 and DTS audio formats.

Connect the Player’s digital audio outlets (optical) to the corresponding

input on the amplifier. A special optical audiocable is required for this

purpose, this cable is not supplied with the MediaPlayer-3.

Also, change the player’s settings on the “AV settings” menu to DIGITAL, by

pressing the A/D button on the remote control. Refer to your amplifier’s

instruction manual for more information on correct setup and cables are not

included in the package.

Connection to Television