MANUAL MediaPlayer Drive-In Kit

Table Of Contents

General Information

* USB 2.0 is downwards compatible to USB 1.1. To achieve optimal performance from the

Freecom Network MediaPlayer-35 drive in kit your PC should be equipped with an USB

2.0 port. USB 2.0 PCI Host Controllers are separately available at www.freecom.com.

Minimum System Requirements

USB Requirements

• Windows 98SE, ME, 2000, XP / MAC OS X 10.1 or higher / Linux 2.4.x or higher

• Available USB 2.0, 1.1 Port (USB 2.0 recommended)*

Network Requirements

• Windows 98SE, ME, 2000, XP

• Available 10/100 Ethernet LAN Port, RJ-45 (100Mbps recommended)

• LAN Cable (cross-wired or standard - see Page 28 2.1)

Hardware Requirements

• Pentium III 500MHz or faster

• At least 128 MB RAM

• USB interface (USB 1.1 or USB 2.0*)

• A CD-ROM drive or internet connection for driver installation

• For playback on TV, a TV with PAL or NTSC system is required.

• Support HDD: Compatible with standard 3.5" IDE Hard Drive