USER MANUAL MOBILE DVD RW RECORDER LS PRO EXTERNAL DOUBLE LAYER DVD+/-RW / USB 2.0 / FIREWIRE / LIGHTSCRIBE WIN & MAC Rev.
Freecom Mobile DVD RW Recorder Dear user, EN welcome to the installation of your Freecom Mobile DVD RW Recorder. Before installing the drive, please read through the following points regarding its compatibility with your system. Freecom Technologies • Germany www.freecom.com Copyright Statement This product and the software contained within it are designed to assist you in reproducing only material in which you own the copyright or for which you have obtained permission to copy from the copyright owner.
Table of Contents User manual General information............................................................................................................ Page EN 4 Chapter 1: Start Up..................................................................................................................................... Page 6 Chapter 2: Installing the application software................................................................................ Page 8 Chapter 3: Using the Drive.................
Freecom Mobile DVD RW Recorder General information EN Reliable performance of the Freecom Mobile DVD RW Recorder cannot be guaranteed for configurations that do not meet the following requirements: Hardware Requirements To use the Freecom Mobile DVD RW Recorder, you must have a computer with the following minimum requirements: PC • Intel / AMD CPU 1.6 GHz or faster • at least 512 MB RAM (1 GB recommended) • USB (USB 1.1 or USB 2.
General information Media standards • EN DVD single/dual layer, DVD-R, DVD+R, DVD-RW, DVD+RW, CD-DA, CD-ROM, CD-ROM XA, CD Extra, CD-I, Mixed-ModeCD, VideoCD, PhotoCD, CD TEXT, Bootable CD, Disc At Once, Session At once, Track At Once, Multi-Session. Precautionary Measures and General Notes • After transport, particularly at low outside temperatures, condensation can form which can lead to a malfunctioning.
Freecom Mobile DVD RW Recorder Chapter 1: Start Up EN Warning! Only connect the Mobile DVD RW Recorder via the USB or Firewire port. Never use both ports at the same time! 1 1.1 Hardware installation 1. Connect the interface cable to the Freecom Mobile DVD RW Recorder. 2. Connect the cable of the power supply to the Freecom Mobile DVD RW Recorder and the power supply itself to the socket. 3. Connect the interface cable to the interface port of your computer. Since USB .
Start Up EN Note: You can plug the USB cable into your computer and unplug it while the computer is running ("hot plug & play"). Remove the cable from the computer when doing so, never remove the cable from the drive when the computer is on. 1 For optimal performance, the Freecom Mobile DVD RW Recorder should always be connected to a USB 2.0/Firewire port.
Freecom Mobile DVD RW Recorder Chapter : Installing the application software EN To record blank media, you must first install the Recording Software. We recommend using the software which has been provided with your drive. PC: To install the application software, insert the "Application & Manuals" CD, klick "Easy Media Creator". Follow the instructions on screen.
Installing the application software 2.1 Special Instructions before Writing a CD / DVD • You should realize that writing CD/DVDs is principally a sensitive data transmission procedure which can be disrupted by even the smallest mechanical disturbance. • Never clean the Freecom Mobile DVD RW Recorder with a commercially available CD or a CD-ROM cleaning set. This can damage the drive. • Recordable and Rewritable CD/DVDs (blanks) are more sensitive than commercially available CD/DVDs.
Freecom Mobile DVD RW Recorder Chapter 3: Using the Drive EN How to Use the Discs 3 Attention! When using CD-ROM, CD-R, CD-RW or DVD R/RW discs, don’t attach any stickers or labels to the discs. Using discs with them attached not only causes read and write errors, but data on the disc may be lost due to damage to the disc itself. 3.1 Load the disc 1. Press the eject button. 2. Place the disc on the disc tray. 3. Load the disc by pushing in the disc tray. 3.2 Disc ejection 1. Press the eject button.
Using the Drive 3.3 Emergency Eject EN This drive has a function that allows the CD/DVD to be ejected manually if this becomes necessary in an emergency such as failure of the drive or a power outage. Follow the following procedures in such a case. Don’t use this feature except in an emergency. 3 1. Turn the power to off. 2. Poke a fine tipped object into the small hole above the eject button. The front door pops open and the disk tray comes partway out. 3.
Freecom Mobile DVD RW Recorder Chapter 4: Trouble shooting - General problems EN If you still have problems getting your Freecom drive to function properly despite having installed it correctly, then please check the following items: 4 Hardware requirements: • Does your system meets the hardware requirements (see page 4)? Connecting the Freecom device: • Is the cable connected correctly to your computer and the Freecom device? Check whether cable is plugged in correctly.
WARRANTY (valid in Europe/Turkey only) We thank you for purchasing this Freecom product and hope you will enjoy using it. In order to avoid unnecessary inconvenience on your part, we suggest reading the quick install guide, instruction manual and any additional electronic and or printed manuals. When problems occur we have a database with Frequently Asked Questions (FAQ) on our Freecom website (www.freecom.com), please check this site before you contact the helpdesk.
