Bento 6 DS Module Carrier Operating Manual
Fredenstein Bento 6 DS Module Carrier The Fredenstein Bento 6 DS is the most advanced module carrier for six Fredenstein Series 600 modules or API-500 compatible plug-in cards in 3U 19 inch rack format. The Bento 6 DS features several important upgrades compared with third party products: The color LCD Display and a rotary encoder: To set routing and other parameters with non-volatile storage.
Fredenstein Bento 6 DS Module Carrier If certain non-Fredenstein modules are used, which bridge several pins on the connector and connected the contacts on the top and button side, the double switches, located directly besides the slot connectors, can both be turned off (lower position) to avoid interference between the module and the digital interconnect. For Fredenstein modules, both need to be in the ON (upper) position.
Fredenstein Bento 6 DS Module Carrier In the Slot Input menu the input signal for slots 2 to 6 can be selected. (Slot 1 always gets its input signal directly from the XLR connector located on the back-panel). By turning the wheel the desired slot can be selected and by pushing the wheel the value toggles between XLR for the slots input XLR connector or the output of the slot to its left. Selecting Exit will show the Setup Menu again.
Fredenstein Bento 6 DS Module Carrier Ten different setups can be stored. By selecting Memory and push the wheel and the number of the setup is highlighted, turn the wheel to the number you want to use, then press the wheel to store the configuration. Selecting Exit and pushing the wheel will show the Setup Menu again.
Fredenstein Bento 6 DS Module Carrier Rear View: Specifications: Input Voltage: Output Voltages: 90V AC to 240V AC, 50 to 60 Hz +16V DC 1.5A -16V DC 1.5A +48V DC 0.3A Power Consumption: max. 60W Dimension (LxHxD): 300mm x 135mm x 190mm (without handle and feet) 350mm x 145mm x 190mm (including handle and feet) Weight: 3.8kg(NW) ; 4.
Fredenstein Bento 6 DS Module Carrier Pin 4 Main Out - Pin 5 Audio Ground Pin 6 Compressor Buss Pin 7 AUX Out - Pin 8 Main In - Pin 9 AUX In - Pin 10 Main In + Pin 11 AUX In + Pin 12 +16V Supply Pin 13 Supply Ground Pin 14 -16V Supply Pin 15 +48V Supply Component Side Pin 1 Frame Ground Pin 2 NC Pin 3 Digital Interconnect 1 Pin 4 NC Pin 5 Audio Ground Pin 6 NC Pin 7 Digital Interconnect 2 Pin 8 NC Pin 9 Digital Interconnect 3 Pin 10 NC Pin 11 NC Pin 12 +16V Sup
Contact Info: Fredenstein Professional Audio by Orion Communication 7F-1, No. 582, Ruei Guang Rd. Neihu District Taipei 114 Taiwan Phone : Email : Web : + 886-2-2657-2618 info@fredenstein.com www.fredenstein.