Artistic MIC-PRE Plus Operating Manual
Fredenstein Artistic Microphone Preamplifier Plus The Artistic MicPre Plus features a revolutionary tube type distortion circuit. The variable color control allows to adjust this feature from very subtle to extremely pronounced . In addition the Color feature is also level dependent in the same way tube gear behaves. Variable color enables a myriad of new creative possibilities and prevents cold and stale sounds.
Fredenstein Artistic Microphone Preamplifier Plus Overview: Indicators: COLOR LED: indicates that the color circuit is active Output Peak Level Indicators: +20 dB SIG output level greater than -30 dB Rotary Controls: COLOR : Intensity control of the Color circuit GAIN : Gain Control, minimum +20 dB maximum +65 dB POL PAD LOW Z : : : P48 : reverse Output Polarity when lit -20 dB Input Attenuator when lit 300 Ohm Input Impedance when lit +48 Volt Phantom Power when lit Switches: Connector: DI
Fredenstein Artistic Microphone Preamplifier Plus Color Control: Controls the amount of color added to the signal. When active the yellow LED next to the Color knob is lit. Gain Control: Microphone Preamplifier Gain Control, minimum +20 dB, maximum +65 dB POL – Polarity Control: Pushing the POL switch selects the polarity, when lit (blue), the output polarity is reversed. Otherwise the true, non-reversed, polarity is selected (normal operation).
Fredenstein Artistic Microphone Preamplifier Plus Fredenstein Artistic MicPre Plus Manual V1.
Contact Info: Fredenstein Professional Audio by Orion Communication 7F-1, No. 582, Ruei Guang Rd. Neihu District Taipei 114 Taiwan Phone : Email : Web : + 886-2-2657-2618 info@fredenstein.com www.fredenstein.
