User Manual

! !! !!!!!!!!!!!!!!!!!!!!!!!!! !
!
!
22!
2.4.3!WALL!INSTALLATION!STEPS!
!
To wall mount the CPE, perform the following steps:
1. Ensure that the wall intended for installation is securely solid base.
2. Fasten the CPE on the wall with Mounting Bracket and bolt as shown below.
Figure6: CPE Wall Mounting
3. Install weather-proof CAT-5e cable between Ethernet port of CPE and “DC+Data output” port of POE
injector as shown in Figure 4.
4. Install CAT-5e cable to “To Ethernet” port of POE Injector as shown in Figure 5.