User Manual

! !! !!!!!!!!!!!!!!!!!!!!!!!!! !
!
!
33!
Configuration Structure
Configuration
Parameter name
Description
Default
Value
ROUTER_CONFIG_ST
RUCT
Contains the NAT related
configurations. The structure
is formed of an argument
which enables/ disables NAT
support and a list of NAT
mapping rules.
VLAN_CONFIG_STRU
CT
natEnabled
Enables/Disables NAT
support. When disabled the
CPE is acting as a router
between the two interfaces
0
routerCmd
A NAT mapping rule. The
default NAT rule, maps all
subnets on the Ethernet
interface to the IP address of
the WiMAX interface.
map
wmxEnd1
0/0 - 0/32
Contains a list of VLANs
configuration parameters. Eac
entry contains the following
parameters
vlanInterface
The interface on which to
create the VLAN.
0->
Ethernet
1->
WiMAX
vlanName
The name of the VLAN which
must begin with the prefix
“vlan”
vlanId
The ID of the VLAN to be
placed in the VLAN tag
netAddr
The IP address of the VLAN
interface
netMask
The netmask of the VLAN
interface
!
!