User Manual

! !! !!!!!!!!!!!!!!!!!!!!!!!!! !
!
!
27!
3.2!SYSTEM!SETTINGS!
The System Settings is used to review, change and save all CPE system settings. Only the
administrator can make changes to this screen.
!
!
3.2.1!CHANGING!SYSTEM!CONFIGURATION!!
!
To change the CPE system configuration setting, perform the following steps:
1. Enter into the Admin Tab field.
2. Enter into setSystemConfiguration* field in the left side of Browser.
3. Click Apply Changes as shown in the screen below**.
!
!
* False CPE-Wimax setting could damage the access to CPE or damage CPE itself.
** Changing system Configuration need to be saved by “SysSavedConfigutation” to keep the
updated configuration parameters permanent on flash.
3.2.2!UPGRADE!SYSTEM!FIRMWARE!!
!
To Upgrade the CPE Wimax firmware system, perform the following steps:
1. Enter into the Admin Tab field.