User Manual

! !! !!!!!!!!!!!!!!!!!!!!!!!!! !
!
!
38!
4.2!UPGRADESW!!
!
upgradeSw
Arguments
image (O)
Represents which image will be upgraded.
Possible values are:
primary: upgrades the primary image
secondary : upgrades the secondary image
If not specified, system upgrades the non-
active image
version (O)
String representing the version which is
used in the upgrade. The version consists of
the major.minor.revision
If the version is not specified, the Version
selection algorithm is used.
hostIP (O)
The IP address of the FTP server on which
upgraded software is placed. If hostIP is not
specified, the default host IP configured in
the CPE is used.
path (O)
The full path to the software image on the
FTP server. If path is not specified, the
default path configured in the CPE is used.
Example: /upgrades
username (O)
The user name to login to the FTP server to
get the software image. If the user name is
not specified the username configured in
the CPE is used.
password (O)
The password to login to the FTP server to
get the software image. If the user name is
not specified the password configured in
the CPE is used.
reboot (O)
Specify whether to make reboot for system
after upgrade is completed.
Description
Upgrades/Downgrades the firmware on the CPE.
Examples
upgradeSw
upgradeSw primary
upgradeSw secondary reboot=1
upgradeSw secondary v0.0.1
4.3!SHOWVERSIONS!
!
showVersions