User's Manual

  


FRCGroupProprietaryandConfidential
FRCWimaxoutdoorCPE–UserManualrev4.0
 ‐37‐


Figure 19: NAT setting.

3.4.3LAN

3.4.3.1IPSETTING

To set the IP Address for the CPE Ethernet interface, perform the following steps:
1. Enter into the Network Tab field.
2. Select LAN field.
3. Specify the IP Address and Subnet Mask as shown in Figure 19.
4. Click Apply.
Click Save to preserve the IP Address after rebooting the CPE.

Figure 19: LAN settings.

