User's Manual

  


FRCGroupProprietaryandConfidential
FRCWimaxoutdoorCPE–UserManualrev4.0
 ‐32‐

3.3WIMAXSETTINGS
The WiMAX settings are used to add, remove and display all channels settings. Only the administrator
can make changes to this screen.
3.3.1OPERATIONALFREQUENCIES

To display the scan list of the CPE, perform the following steps:
1. Enter into the WIMAX Tab field.
2. Select Scan list field.
Figure 13: Operational frequencies display.
3.3.2ADDFREQUENCY

To add a frequency channel, perform the following steps:
1. Enter into the WIMAX Tab field.
2. Select Add Frequency field.
3. Specify the channel frequency, duration and bandwidth as shown in Figure 14.
4. Click Apply.
Click Save to preserve the added frequencies after rebooting the CPE.