User's Manual
FRCGroupProprietaryandConfidential
FRCWimaxoutdoorCPE–UserManualrev4.0
‐28‐
3.2.2SYSTEMREBOOT
To reboot CPE, perform the following steps as shown in Figure 9:
1. Enter into the Management Tab field.
2. Select Reboot field.
3. Select to Primary or Secondary image.
4. Click Apply.
Figure 9: System reboot.
3.2.3UPGRADESYSTEMFIRMWARE
To Upgrade the CPE firmware system based on FTP, perform the following steps:
1. Enter into the Management Tab field.
2. Select Firmware field.
3. Fill the ftp setting, as shown in Figure 10.
4. Click Apply.
Consult your WiMAX service provider for this process, wrong image could damage your CPE.