User's Manual
FRCGroupProprietaryandConfidential
FRCWimaxoutdoorCPE–UserManualrev4.0
‐27‐
3.2SYSTEMMANAGMENT
The system management is used to review, change and save all CPE system settings. Only the
administrator can make changes to this screen.
3.2.1WIMAXAUTHENTICATION
3.2.1.1WIMAXAUTHENTICATIONCREDENTIALS
To change the CPE credentials, perform the following steps:
1. Enter into the Management Tab field.
2. Select credentials field.
3. Enter the user name in the form someone@thebluezone.com.
4. Enter the password.
5. Click Apply.
3.2.1.2WIMAXAUTHENTICATIONSUPPORT
To enable TTLS authentication mode, perform the following steps:
1. Enter into the Management Tab field.
2. Select credentials field.
3. Select to enable or disable Authentication.
4. Click Apply.
The WiMAX authentication will take effect by next WiMAX session.
Click Save to preserve the credentials after rebooting the CPE.