User's Manual

  


FRCGroupProprietaryandConfidential
FRCWimaxoutdoorCPE–UserManualrev4.0
 ‐25‐

3.1LOGGINGIN
To log in to the administrator GUI, perform the following steps:
1. Ensure the installation described in Chapter 2 is complete. Check that the CPE has power and
that the signal strength is good.
2. Launch an Internet browser on the administrator’s PC.
3. Enter the default IP address 172.20.0.1 in the browser address field and press Enter. The Login
screen displays as shown in Figure 7:



Figure7: Sign-In Page.



4.Enter user name frcweb and password frcadmin and click Sign In. Then CPE configuration
homepageappearsasshowninFigure8:


