User's Manual

  


FRCGroupProprietaryandConfidential
FRCWimaxoutdoorCPE–UserManualrev4.0
 ‐21‐

2.3.3WALLINSTALLATIONSTEPS

To wall mount the CPE, perform the following steps:
1. Ensure that the wall intended for installation is securely solid base.
2. Fasten the CPE on the wall with Mounting Bracket and bolt as shown below.
Figure 5: CPE Wall Mounting.
3. Install weather-proof CAT-5e cable between Ethernet port of CPE and “DC+Data output” port
of POE injector as shown in Figure 3.
4. Install CAT-5e cable to “To Ethernet” port of POE Injector as shown in Figure 4.
2.3.4INSTALLATIONCHECKUP