User's Manual
FRCGroupProprietaryandConfidential
FRCWimaxoutdoorCPE–UserManualrev4.0
‐17‐
2.3HARDWAREINSTALLATION
This section describes the proper steps required to install the CPE, and to align the antenna.
2.3.1CHOOSINGALOCATION
To make optimal use of the CPE, a suitable location is important. The range of the CPE largely
depends upon the position of the antenna. It is recommended that CPE is within 2Km from the
BS and an overall survey performed, observing the following requirements, before installing the
CPE:
• Do not place the CPE near the floor or near metal objects, such as drain pipes.
• The location must allow easy disconnection of power to the CPE if necessary.
• Air must be able to flow freely around the hardware.
• The CPE unit must be kept away from vibration and excessive heat.
• The installation must conform to national and local electrical codes