Use and Care Guide

List of parts

Schematic

Caution

• This product is fragile and should be assembled with care.

• The product is for indoor use only and is not suitable for outdoor or any location with drafts.

• Please follow the below steps and requirements specified in the instruction to ensure safety and reliability during the

installation.

• Use caution with children under the age of 8. Children should keep a safe distance to avoid inhaling snow particles and possible

suffocation.

No.

Description

Quantity

Transformer

1 unit

Umbrella-shaped base

1 set

Ring support

1 pc

Figures

1 set（3 pcs）

Christmas tree

2 trees

Light String

1 string(2 tips)

Street lamp (Combined type)

1 set

Wreath

1 pc

Snow flakes

1 bag

Top

1 pc

PAGE 1
• • • • Caution This product is fragile and should be assembled with care. The product is for indoor use only and is not suitable for outdoor or any location with drafts. Please follow the below steps and requirements specified in the instruction to ensure safety and reliability during the installation. Use caution with children under the age of 8. Children should keep a safe distance to avoid inhaling snow particles and possible suffocation. Schematic List of parts No.
PAGE 2
Assembly Instructions 1) Install Street Lamp • Unfold the umbrella-shaped base. • Assemble the street lamp components as shown on schematic and insert the plug at bottom into No. 1 jack in the base. • Note: Tighten up each screw so that the lamp tube forms a strong base for the product. 4) Testing the Snowflakes • • • • Confirm all the above instructions have been completed. Make sure there is no blockage in the snow container so there is a flow of snowflakes.