Instructions / Assembly

1) Schematic diagram
2) Component list
No.
Name
Quantity
1
Firmware (rear part)
1
2
L-shape support (right)
1
3
Lamp holder (right)
1 set
4
Firmware (front part)
1
5
Y-shaped connection wire
1 set
6
Short lamp-post (6.5in)
1 set
7
Long Lamp-post (17in)
2
8
Adapter (12V AC 1000mA)
1
9
Extended wire (137in)
1
10
Power wire (137in)
(59in lamp-post , 79in out of lamp-post)
1
11
Additional base
1 set (4)
12
Ground nail
1 set (4)
13
Lamp base
1
14
Square base
1
15
Connector of long lamp-post (2.5in)
1
16
Brand
1
17
Wreath + bowknot
1 set
18
Lamp pendant
2
19
Lamp holder (left)
1 set
20
L-shaped support (left)
1
21
Screw
6+1
（Firmware）
4+1
(Lamp base)
Note: 1,2,3,4,5,6,7,8 are wire connectors
3) Installation steps
The assembly shall be made from bottom to top, and the
main steps are shown as below:
1. Installation of lamp base and lamp-post
(see series figures A-F above)
Caution
 This product (especially the lamp holder) is
fragile, do not exert too much strength or drop it
during the assembly and use. Be sure to fix it
on the wall securely.
 This product is waterproof; but it is necessary
to keep the lamp in the vertical direction to
ensure water drains correctly.
 Please assemble it in strict accordance with
the steps and requirements specified in the
instruction to ensure safety and reliability
during the installation.
