ENGLISH Snowing Street Lamp Assembly Manual
Caution This product (especially the lamp holder) is fragile, do not exert too much strength or drop it during the assembly and use. Be sure to fix it on the wall securely. This product is waterproof; but it is necessary to keep the lamp in the vertical direction to ensure water drains correctly. Please assemble it in strict accordance with the steps and requirements specified in the instruction to ensure safety and reliability during the installation.
A/B: Use 4 screws to combine the lamp base (13) with square base (14). C/D/E: In order to stabilize the street lamp, it is required to combine with the additional base. Firstly, it is required to combine 4 pieces of additional base (11) as a whole, and then combine the whole additional base (11) with lamp base (13). Note: If the lamp is used outdoor and the lamp base can be fixed via ground nail, it will be unnecessary to use the additional base (11). F: Installation of lamp post.
the above lamp holder except that it cannot play music. The below switch function is shown on the right. √ 5. Decorate and enjoy B. Power-on: Tightly connect the connectors (1) and (4) of adapter (8) and power wire (10). If the power wire (10) is not long enough, extended wire (9) between them and then connect the adapter and main power. C. Waterproof: If the street lamp is used outdoor, please complete the below (see series figures a-e): a.