Instructions / Assembly

CAUTION! ALWAYS UNPLUG YOUR TREE FROM ITS POWER SOURCE BEFORE ATTEMPTING FUSE REPLACEMENT.
This product comes with a fuse for overload protection. A blown fuse indicates an overload or short circuit. If
a fuse blows, unplug your tree from the wall outlet. Replace the fuse per the replacement instructions below
(follow product marking for proper fuse rating). If the replacement fuse blows, a short circuit may be present and
the product should be discarded.
Light set fuse replacement (replaceable 3-amp 125V fuses are located in the plug)
1. Grasp plug and remove from its power source.
2. Locate blow fuse(s) by sliding access cover on top of plug towards prongs.
3. Remove blown fuse by turning the plug over. Fuse should fall into your hand.
Gentle tapping may be required.
4. Locate spare replacement fuses in the parts bag.
5. Insert new fuse and slide the fuse access cover closed.
CAUTION! To reduce the risk of  re, replace the fuse in the light set with only a 3-amp 125V fuse. Do not
replace the plug. Discard product if the plug is damaged.
Main cord fuse replacement (replaceable 5-amp 125V fuse is located in the plug)
1. Grasp plug and remove from its power source.
2. Locate blown fuse by sliding the fuse access cover on top of plug toward the prongs.
3. Remove blown fuse.
4. Insert new fuse (replacement fuse located in holder attached to the cord near plug)
5. Slide the fuse access cover closed.
CAUTION! To reduce the risk of  re, replace the fuse in the main cord with only a 5-amp 125V fuse. Do not
replace the plug. Discard product if the plug is damaged.
Lumin Tune/Multi-Function LED Plus (available on select trees)
1. Musical Lightshow:
• Press on the controller to turn on the green indicator light
• Play music over your speaker/smart phone next to the controller
• For the best visual e ect, place your music source close to the controller
• Adjust volume for optimal/desired e ect
2. Mode:
• Clear/Multi, Steady On
• Color Changing
• Clear/Multi, Twinkling
• Color Changing, Fading
• Clear/Multi, Fading
3. Dimmer: Allows brightness of 25%, 50%, 75% and 100%
NOTE: Adjust speaker volume & distance to the controller to determine the best lightshow performance.