User Manual

FX10 WiFi 6 Mesh Extender
7
LED Behaviors
The following table describes the LED indicators that is located on the router front view.
LED
Description
LINK
• Solid white – The Mesh extender is synced with the Mesh controller (FX20 router)
and is working normally.
• Off – Unable to sync with the Mesh controller.
Mesh
• Solid white – The Mesh extender is ready to sync with the Mesh controller (FX20
Router).
• Blinking white – The Mesh extender is attempting to sync with the Mesh controller
once pressing the Mesh-Link button on the backside for 3 seconds.
• Solid red – The Mesh extender failed to sync with the Mesh controller. Move your
Mesh extender closer to the Mesh controller as your Mesh extender may place out of
range from your Mesh controller or make sure that the Mesh controller mode is
enabled on the router Web UI.
• Off – Power is not supplied
Power
• Solid white – The Mesh extender finished booting.
• Off – Power is not supplied.